Electric Reciprocating Compressor Details

Reciprocating compressors 15HP and above require three-phase power and proper installation planning.

Horsepower Required *

-- Select HP --15 HP20 HP25 HP30 HPNot sure - need sizing assistance

Configuration Preference *

-- Select --Simplex (single pump)Duplex (dual pump)No preference - recommend based on application

Tank Size Preference

-- Select --80 gallon120 gallon200 gallonNo preference - recommend based on application

Primary Application *

-- Select --General shop air / pneumatic toolsSpray painting / finishingSandblastingProduction line automationTire service / automotiveHVAC serviceOther

---

Rotary Screw Compressor Details

Rotary screw compressors require proper electrical supply, ventilation, and installation. Complete specifications ensure faster order processing.

Horsepower Required *

-- Select HP --15 HP20 HP25 HP30 HP40 HP50 HP60 HP75 HP100 HP125 HPNot sure - need sizing assistance

Configuration Type *

-- Select --Base mount (compressor only)Tank mount (with receiver tank)Enclosed (sound attenuated cabinet)Variable Speed Drive (VSD/VFD)

---

Oil-Free Compressor Details

Oil-free compressors are designed for applications where air purity is critical.

Horsepower Range Needed *

-- Select --15-20 HP25-30 HP40-50 HP60+ HPNot sure - need sizing assistance

Primary Application *

-- Select --Medical / dentalLaboratory / researchFood processing / packagingBeverage productionPharmaceuticalElectronics manufacturingOther

Air Quality Standards Required

-- Select --Class 0 (ISO 8573-1)Class 1Class 2FDA compliantNot sure - need guidance

---

Complete System Bundle Details

We'll review your requirements to ensure all components are properly sized and compatible.

Estimated Total CFM Requirement *

-- Select --50-100 CFM100-200 CFM200-500 CFM500-1000 CFM1000+ CFMNot sure - need assessment

Compressor Type Preference *

-- Select --Reciprocating (lower upfront cost, intermittent use)Rotary screw (continuous duty, higher efficiency)No preference - recommend based on application

Components Needed *

Air compressorAir dryer (refrigerated or desiccant)Oil-water separator (EPA compliant)Filtration (particulate, coalescing, carbon)Piping systemAir receiver / storage tank

Is This for a New Facility or Retrofit?

-- Select --New facility / new constructionRetrofit / upgrade existing systemExpansion of existing system

---

Electrical Requirements

Compressors 15HP and above require three-phase power. Verified electrical specifications ensure faster order processing.

Available Voltage *

-- Select Voltage --208V Three Phase230V Three Phase460V Three Phase575V Three PhaseNot sure - need to verify

Has Voltage Been Verified by Licensed Electrician? *

-- Select --Yes - Electrician has verifiedNo - Will verify before order shipsNeed guidance on requirements

Electrical Panel Capacity

Distance from Panel to Installation Location

---

Installation Site

Complete site details help us ensure you receive the correctly configured equipment.

Installation Environment *

-- Select --Indoor - Climate controlledIndoor - Non-climate controlled (warehouse, shop)Outdoor - Covered/shelteredOutdoor - Fully exposed

Floor Type *

-- Select --Concrete slab - 4 inches or greaterConcrete slab - under 4 inches or unknownWill pour new concrete padOther

Ventilation / Cooling *

-- Select --Adequate - existing ventilationLimited - may need improvementsClimate controlled - HVAC in spaceNot sure - need guidance

Ambient Temperature Range at Installation Location

Upload Site Photos (Optional - Max 5 files)

Photos of installation location, electrical panel, and existing equipment help ensure proper configuration.

---

Pressure Requirements

Understanding your pressure needs helps us recommend the right compressor configuration.

Minimum Operating Pressure Required (PSI) *

Maximum Operating Pressure Required (PSI) *

Do You Have Any High-Pressure Processes?

-- Select --No - all equipment runs at similar pressureYes - some equipment requires higher pressure (please describe in notes)Not sure

---

Experience & Installation

Previous Industrial Compressor Experience *

-- Select --Currently operate industrial compressor(s)Have operated industrial compressors in the pastThis will be our first industrial compressorUpgrading from smaller equipment

If Currently Operating, What Brand/Model?

Who Will Install the Compressor? *

-- Select --Licensed electrical contractor + our maintenance teamThird-party compressor installation companyNeed installation support or contractor referralInternal team only

Who Will Perform Ongoing Maintenance? *

-- Select --Internal maintenance teamService contract with local providerNeed recommendations for service providersNot yet determined

---

Site Readiness Requirements:

I understand that industrial compressors require:

• Verified three-phase electrical supply at the correct voltage

• Adequate ventilation for heat dissipation

• Level concrete mounting surface (4"+ recommended)

• Proper installation by qualified personnel

Orders placed with incorrect specifications may be subject to a 25% restocking fee plus return shipping.